General Furniture
Bed Side Locker (Standard)
Code: ASI - 126
- Overall Size: 16" L x 16" W x 32" H
- Tubular pipe construction fitted PVC stumps
- Assembled to M.S. cupboard
- Stainless steel top
- Finish: Epoxy Powder Coated
- Note: Also available in full Stainless Steel
Bed Side Locker (Deluxe)
Code: ASI - 127
- Overall Size: 16" L x 16" W x 32" H
- CRCA sheet constructions having one box and one drawer
- Laminated top with three sides raise edges
- Finish: Epoxy Powder Coated
- Note: Also available in full Stainless Steel
Over Bed Table (With Laminate Top)
Code: ASI - 138
- Overall Size: 42" L x 16" W x 39" H
- Tubular frame work mounted on 5 cm castors
- Fixed Laminated top 30" L x 16" W
- Finish: Epoxy Powder Coated
- Note: Also available in full Stainless Steel
Over Bed Table (Manual)
Code: ASI - 139
- Rectangular frame work mounted on 5 cm castors
- 30" L x 16" W laminated top adjustable by side knob
- Finish: Epoxy Powder Coated
- Note: Also available in full Stainless Steel
Over Bed Table (Adjustable by Gear Handle)
Code: ASI - 140
- Rectangular frame work mounted on 5 cm castors
- 30" L x 16" W laminated top adjustable by gear handle
- Finish: Epoxy Powder Coated
- Note: Also available in full Stainless Steel
Bed Side Screen (4 Panels)
Code: ASI - 128 F
- Overall Size: 66" H x 96" L
- Tubular frame work mounted on 5 cm castors with curtains
- Finish: Epoxy Powder Coated
- Note: Also available in full Stainless Steel
I.V. Stand (Stainless Steel)
Code: ASI - 129 S
- I. V. stand frame made of high quality CRCA / SS / plastic pipes
- I. V. Stands with five spiked base on 5 cm castors
- Chrome plated adjustable rod with double hook
- I. V. Stand of S.S. adjustable rod with four hook is also available
- Note: Also available in M.S.
Suction Machine
Code: ASI - 171 H
- Powder coated M.S. chassis.
- Noise level of suction apparatus from is 50 dB + / - 03 dB
- Leakage current of suction units is less than 84 uA
- Electrical requirement - 220 ~ 230V, 50Hz, 1 Phase
- Ideal for MTP / medical / surgical procedures
- Rotary vane type vacuum pump with / 740 + / - 10mm Hg
- Free air displacement 40 ~ 60 litre / min
- Heavy duty HN / 65 antistatic castors. 320 Watt, 1440 RPM, 0.50 H. P. Electric Motor
- 100mm vacuum gauge
- Non collapsible silicon tubing
- 2 x 2.0 Litre polycarbonate jars with overflow safety
- Bacterial filter fitted on top
- Note: Also available in full Stainless Steel
Double Walled S.S. Autoclaves (Single Drum / Double Drum)
Code: ASI - 175
- Double walled Autoclave generates steam at a temperature ranging between 120 to 135 degree C
- It is used to sterilize surgical instruments, dressing material, linen, rubber, plastic material, injection liquids by means of steam under pressure of 15 - 20PSI (Adjustable)
- It has double safety valves - One spring loaded and other dead weight for additional safety
- Complete with pressure gauge steam release valve, water outlet valves tripod stand
- Available in various sizes. Most commonly used size is 12" x 22"
Triple walled Vertical High Pressure S.S. Autoclaves (Double Drum)
Code: ASI - 176
- Triple walled Vertical High Pressure Autoclaves used for sterilization under saturated steam pressure at any selected point between 10 - 20 PSI (Adjustable)
- These are double chambers with inner chamber (boiler) made of 18 SWG SS and outer chamber is covered with MS radial locking system
- Fitted with neoprene rubber gasket, all systems are hydraulically tested up to 40 PSI as a safety measure
- All autoclaves are fitted with standard accessories such water level indicator / low water indicator, temperature control, pressure gauge, steam release cock, spring loaded safety valve, heating elements etc supplied as complete order
- Available in various sizes. Most commonly used size is 16" x 24"
Gas Cylinder Trolley
Code: ASI - 190
- Overall Size:10" L x 16" W x 36" H
- Tubular frame work mounted on 4 cm castors
- Finish: Epoxy Powder Coated
- Note: Also available in full Stainless Steel
.png)
.png)
.png)
